2.0 Dual Slider (Pack A Shelf)
2.0 Dual Slider (Pack A Shelf)
Couldn't load pickup availability
- MODULAR DESIGN
- SUITS ANY VEHICLE
- WORLDWIDE SHIPPING
- HEAVYDUTY












































2.0 Dual Slider (Pack A Shelf)
Our Dual Slider is the perfect solution for vehicles who like to utilise our slide out system with their Milwaukee Packout boxes. As the name suggests the 2.0 Dual Slider has cut outs designed to suit 2 x full width packout box or 4 x half width packout box.
The 2.0 Dual Slider has lasered cut outs designed to suit the Milwaukee Packout System which can clip into the slider. The Slider can be used as a stand alone product, or if you would like to take it to go further with your storage solution it has the ability to add our Pack a Shelf walls and shelving on top of the Slider to take your set up to the next PRO level.
The Dual Slider would suit vehicles with space for those who don't want to reach in to grab their Packout. This product would suit canopies, vans and trailers.
The base of the Slider comes with 15 x 5mm holes to mount the Mini Slider to your flooring system (screws not supplied).
The supplied sliding rails are 52" inch heavy duty rails with a capacity of 160kgs at full extension. The sliding rails feature a fully metal locking mechanism and black triggers to complete the look.
The top of the Dual Slider has inbuilt cut outs and lock to suit your Milwaukee Packout boxes. It also includes 8 x 5mm threaded holes if would like to add shelving and walls on top of the slider (sold separately).
Please note: If you are installing a Dual Slider with added shelving and walls on top you must add a back brace the system (not supplied by 3DPRO).
This may be done in 2 ways:
1. Installing a sheet of plywood to the back of the walls, then screwing the walls to the bracing plywood
OR
2.Installing an "X" brace using 3mm aluminum to the back of the walls.
If you still unsure, please check out our YouTube video on installation at the 10:00 minute mark of video.
If you have not braced your Pack A Shelf system, this will void any warranty claims on the products.
What's included in the package for a 2.0 Dual Slider?
1 x Dual Slider base
1 x Dual Slider top
2 x 52" heavy duty sliding rails (left and right)
16 x m5 flat head bolts (to bolt sliding rail to base & top)
16 x m5 nylon lock nut (for bolts on sliding rail)
8 x m5 pan head bolt (if bolting walls to slider)
8 x m5 nylon lock nut (if bolting walls to slider)
(Comes as Flat pack - End User to assemble)
Still Confused on the perfect setup for your needs?
Book in a design consult with Luke, 3DPRO's founder, via zoom or in person to go through your options so you can get the perfect setup
or
Watch our latest YouTube video on what Pack A shelf is: HERE
-------------
All Pack A shelf products do not meet our free shipping thresholds. Shipping for Pack a Shelf items are calculated by weight at checkout to your address.
Hint: Sending your Pack a Shelf products to a business will be cheaper due to B2B shipping calculations via our 3rd party couriers.
If you would like to Pick up your order (FREE) from our Bayswater, Melbourne factory you may do so by selecting PICK UP at checkout
International orders are required to pay any taxes/vat/import duties applicable to their order based on the shipping destination. 3DPRO is not liable for any additional costs the customers country may imposes on their order.
3Dpro DOES NOT include any applicable taxes/vat/import duties outside of Australia in our pricing.
-------------
Warranty: 1 year from date of receiving our product. Please retain your order information and invoice for any warranty claims required.
Height: 100mm (4inches)
Width: 420mm (16.6inches)
Length: 1350mm (53.15inches) (+20mm Triggers)
Length: (extended out): 2700mm (106.2inches)
Dry Weight: 24kgs (53 Lbs)
Weight Capacity: 160kg (352 Pounds) at full capacity and evenly distributed
Locking Drawer Slides: Yes, Locks in the closed and open position
Direction: Can be left or right side mounting (reversible top to suit your needs)
Heavy Duty Drawer Slides: Yes, our sliding rails (38" and 52") are heavy duty with a fully metal plate locking mechanism
Sliding Rail extension: Our sliding rails go to 95% of full extension
Material: 3mm Aluminium grade 5052
Finish: Black Powder Coat
Style: Laser cut and Folded
Packaging: Flat Packed - End User to assemble
Warranty: 1 year
How does Pack A Shelf work? (Modular)
or View all Videos on YouTube:
3Dpro Melbourne YouTube Channel
or Follow these steps below:
Lets Get Organised!
Our patented modular Aluminium Shelving
System is designed to enhance storage solutions in vehicles, trailers,
garages, workshops and more!
This innovative system is engineered for compatibility
with the Milwaukee Packout system, providing a versatile and robust
organisational tool. Constructed from heavy duty, laser-cut, and folded
5052 aluminium, the shelving system features adjustable shelves,
customizable configurations, and secure mounting options.
The design includes modular components such as:
A) Full-width shelf
B) Half-width shelf
C) Full-height walls (450mm high)
D) Half-height walls (250mm high)
E) Packout 2.0 dual slider
F) Packout 1.5 Mini Slider
All sold separately to allow you to tailor it to your
own specific needs and wants!
The system’s modularity allows for easy customisation and
reconfiguration to meet specific user needs, offering significant improvements
in storage efficiency, accessibility, and space utilisation.
STEP 1:
Watch our YouTube videos to getting better deep
understanding of Pack-A-Shelf
https://www.youtube.com/@3DPROMelbourne
STEP 2:
Measure your required space availability in your
desired location:
- Height x Width x Length
STEP 3:
Takes notes of what Packout boxes you currently have and
what you may want in the future
- This will help you determine how many shelves you need
(full width or half width shelves)
STEP 4:
Use our online 3D builder to design a modular
system that will fit in your desired space
- (CLICK HERE) to
build your dream setup (beta mode)
STEP 5:
Choose if you want shelving and walls to be on a
dual slider or fixed in position
- Some tradespeople want their Packout to slide out from
your vehicle
- Some tradespeople just want it fixed in position
(stationary walls and shelving)
or a combo of both!
STEP 6a: (with dual slider and mini slider)
So you want to be a PRO and use our dual slider?
- Our dual slider comes pre-assembled for (right-hand
use) but the slider top can be flip 180 degrees to allow for left-hand use)
- Our dual slider can be used on its own
and allows you to lock in your packout boxes
- Great for areas with limited height availability
eg: utes with roller cover
OR
- You can add our pack a shelf walls and shelving on top
of the dual slider to maximise your storage.
The ultimate way to be more organised and efficient on
site.
STEP 6b: (without dual slider) or adding walls and
shelves to slider
Want to have stationary Pack a shelf walls and shelving?
- 1. Pick how many Pack a shelf walls
you need
We have two modular options for walls: c) full
height walls 450 mm in height and d) Height height walls
250 mm in height
Each walls have 20mm lip with m5 threaded holes top and
bottom to allow the walls to stack on each other
Each walls has side holes every 15mm allowing
the shelves to bolt in any desired height!
STEP 7:
Now let's choose what size Pack a shelf shelves you need
- We have two modular options for you:
A) Pack a shelf full width shelf (great for
all standard size packout - drawers - full width items)
B Pack a shelf half width shelf (great for
ammo can, half width organisers, etc)
Both size shelves work with our walls and could use a
combo of both
Example: You only have 1000mm in WIDTH
available: You could use a full width shelf (625mm wide) next to a half width
shelf (320mm wide) = total width: 945mm
STEP 8:
How many shelves do you need?
- There is no simple answer to this but that's why our
system is so vertisal and customisable to your needs!
If you have 2 x sets of drawers that you need stacked on
top of each other, you will only need 2 x a) Full width shelves and your 2 x c)
full height walls (900mm in height)
But if you have 2 x c) full height walls (900mm in height
but you have 6 x slimline full width packouts) and want all of them to be on a
individual shelf each. Then you will need 6 x a) full width
shelves.
Its endless options to suit your
needs.
STEP 9:
You have your dual slider, walls and shelves sorted now?
Add each item individually to your cart and check out
through our online cart!
We ship worldwide or can-do local
pickup from our 3Dpro HQ (Melbourne, Australia)
STEP 10:
Install your new modular aluminium shelving into your
desired space!
Welcome, you are now a PRO!
Enjoy being productive and efficient on site, so you can
spend more time off site doing what you love off site!
Watch how our shelving will boost your
productivity allowing you to complete jobs in record time. Not
spending 20mintues looking for a 10mm socket, because your van is a complete
mess.
STEP 11:
Still confused? That's okay, designing the perfect
modular system is hard!
BOOK IN A CONSULTATION CALL with our founder
Luke via phone call, zoom or in person at our Melbourne 3DPRO HQ.
Its fully redemple on pack a shelf products when your
happy with your design!
STEP 12: (BONUS STEP)
- Want to become even more of PRO tradie?
You have all this milwaukee packout and no idea whats in
each packout?
Using our 3Dprinted labels and latches to
customise your stack!
- Telling your apprentice where your 90mm hole-saw
is, knowing it’s in a packout with a label. Your apprentice will only take 30
seconds and not 10 minutes .... maybe...
Disclaimer: We are not responsible for any
apprentices who are not capable of simple instructions!
HOW QUICKLY CAN YOU ANSWER MY QUESTION?
We answer messages and emails in the order they are received and we try to respond as promptly as possible. We mostly reply within 24 hours of receiving a message or email.
CAN I CHANGE MY SHIPPING ADDRESS AFTER MY ORDER HAS BEEN PLACED?
Once an order is placed, our warehouse staff can pack and ship your order within 24 hours, so it's not always possible to process address change requests. If you notice an error, please email us ASAP with your name and order # so we can try to make a correction(s) to your package before it departs. There's no guarantee we can make it, especially once it leaves our warehouse, but we'll do everything we can!
HOW LONG IS THE PROCESSING PERIOD?
Order processing times are between 3-5 business days after the day you placed your order. Most packages are prepared within 24 hours, but if our warehouse is exceptionally backed up processing times can be longer.
GENERAL SHIPPING INFORMATION:
Our warehouse processes and ships out all orders Mondays - Fridays (excluding major holidays). After placing your order, your package should be shipped out within 3-5 days after your order is placed, and you will receive an email with the tracking number soon after.
WILL MY ORDER COME IN ONE PACKAGE?
Depending on the size of your order you may receive separate packages that may possibly arrive 1-2 business days apart.
OUT OF STOCK/BACKORDERED ITEMS:
In the event that any of your items are out of stock, we will send you an email to let you know when we expect to have the items shipped out by. If the items are not expected to be restocked within 2 weeks, we will just automatically refund you for those items.
ADDRESS CHANGES:
Our warehouse staff are super quick, so if you notice an error please email us ASAP with your name and order number so we can try to catch your package before it departs. There's no guarantee we can change it, especially once it leaves our warehouse, but we'll do everything we can!
DO YOU SHIP INTERNATIONALLY?
Yes, we ship worldwide!
All international shipping is calculated at checkout based on the weight of your order and your shipping address.
I RECEIVED A DAMAGED ITEM, WHAT DO I DO?
We apologize that your shipment didn't arrive in perfect condition! Please contact us at info@3dpromelbourne.com.au with your name and order number for further assistance.
HOW CAN I TRACK MY ORDER?
Simply go to the Track My Order link on the Home Page or in the Main Menu and input your tracking number to see where your package is. If you need further assistance, we are always willing to help you.
WHY ISN'T MY TRACKING NUMBER WORKING?
Often, tracking numbers will only function on domestic orders, as foreign postal systems will not update the location of the package in our carriers' systems. International shipping usually takes between 2-4 weeks, so you can estimate that it will take about that long from the time your package ships until you'll receive it. If your order is domestic and the tracking number doesn't work, please let us know so we can make sure that your items were properly shipped.
THE TRACKING NUMBER SAYS DELIVERED, BUT I HAVEN'T RECEIVED MY ORDER?
Please email us at info@3dpromelbourne.com.au, so we can track it on your behalf. Often couriers may take it to your local post office if you were not home at the time of delivery.
WHAT DO I DO IF SOMETHING IS MISSING IN MY ORDER OR IS DAMAGED?
If any of your purchased items are missing or are damaged please contact us immediately to resolve the issue. We have a Money Back Guarantee which lasts 30 days prior to the delivery of your order so make sure to contact us within that time frame. To get a hold of us to assist you please either use the
Contact Us tab or email us at info@3dpromelbourne.com.au
----
Thankyou, from the team at 3Dpro!
At 3DPro Melbourne, we get it —because we're tradies too.
Built by a fellow tradesman who knows the daily grind, our gear is designed to make your work easier, faster, and more efficient.
From folding buckets to packout shelving and custom templates, every product is made with the job site in mind.
We design and 3D print in house, so you get practical, high-quality solutions backed by real experience.
No gimmicks — just smart tools that actually help.
Join the growing community of tradies around Australia levelling up to PRO status with 3Dpro!
Do you offer FREE Shipping?
Yes, we offer FREE shipping for all orders over $100 for Australia, New Zealand, U.S.A and U.K. This excludes Pack A Shelf Items. All shipping costs for Pack A Shelf Items will be calculated at checkout based on the weight of the items and shipping destination.
Please note for international orders all VAT and duties are the responsibility of the customer and are not included in our pricing.
How long does it take to receive my order?
All of our 3D Printed products are printed in house and made to order, therefore please allow up to 5 business days for your order to be printed and dispatched. (unless in sale periods, where dispatched timeframes may be longer)
All shipping timeframes are based on the courier availability.
We predominantly use Auspost who advise their shipping timeframes as the following:
Standard Shipping: 3-6 business days
Express Shipping: 1 – 3+ business days.
Can I return and refund my order/items?
We offer change of mind returns on any items up to 14 days after you have received your order. To be eligible for a return, the item/s must be unused and in the original condition and packaging. Unfortunately, if 14 days has passed, we cannot offer returns on your items.
Any items with custom text are not eligible for a return,
unless damaged or faulty.
Items with obvious signs of use, any item/s not in its original condition or damaged, or missing parts for reasons not due to our error and any item that is returned more than 14 days after the order was delivered will be deemed as non-returnable items.
All change of mind returns with incur a 10% restocking fee
and the cost of the return shipping label to be paid by the customer. If you need
help organising a return shipping label, please get in contact with us at info@3dpromelbourne.com.au
Once your return is received and inspected, we will send you
an email to notify you that we have received your returned item. We will also
notify you of the approval or rejection of your refund. If you are approved,
then your refund will be processed, and a credit will automatically be applied
to your credit card or original method of payment, within a few business days.
The item/s I have received are faulty or damaged, what do I do?
If your item is faulty or damaged when received, please get
in contact as soon as you receive the items. Please retain all original
packaging and do not use the product if faulty or damaged. If you notify
us of any faulty or damaged products more than 14 days after you received your order, evidence will need to be provided that you have not used/open the
product and you have not left the order in weather/direct sunlight which can
compromise the products.
Please email info@3dpromelbourne.com.au if you have received
any damaged on faulty items and provide the following:
1. Your order number
2. A description of the damage/fault
3. Photos of the faulty/damaged item/s
If care requirements for PETG products have not been
followed the product will not be deemed faulty. Information on PETG
material is listed under the MATERIAL tab on the product specific page.
At 3DPRO, we use high-quality PETG filament for all of our 3D printed products.
Why PETG? Because it’s tough, water-resistant, and impact-resistant — making it the perfect material for trade accessories that need to handle real job site conditions.
While PETG offers some UV resistance, extended exposure to direct sunlight can still cause fading, warping, or degradation over time.
PETG has a uv resistance of around 70 degrees, however long exposure to direct sunlight can affect your product.
Pro tip: Avoid storing your 3D printed items behind glass (like a car windscreen or Packout clear lids), as it can act like a magnifying glass and speed up damage from the sun.
- MODULAR DESIGN
- SUITS ANY VEHICLE
- WORLDWIDE SHIPPING
- HEAVYDUTY

Full width shelf
250mm Height
Set of Walls
Full width shelf
450mm Height
Set of Walls
Half Width Shelf
“Check out our new pack-a-shelf slider system! 🌟 Big thanks to @3D-ELECPRO for designing this ultra-efficient van drawer system. It’s an absolute game changer! 🚚💡” @zeuselectricalandair
“3DPRO: 20L Folding Bucket. A quick little look at the super handy 20L (5 Gal) Folding Bucket from the team at @3dpro.melbourne. Perfect for carrying tools, collecting scrap/rubbish, collecting water, etc.” @m.pyre_kreative
“One of the best things I’ve bought!All my switch mechs where I need, not getting wrecked rolling around in the truck and on display to see what I need 🫶🏼” @toddelecptyltd
“Tag a better setup… ill wait 😤😤😤 📲” @3D.ELECPRO
''New folding bucket fit for the job 🪣'' @tool_box_talk_for_electricians
''A look into one of our jobs this week, installing a new hot water circuit. Brock making full use of the new @3dpro.melbourne buckets we just bought to have in all our vehicles'' @acelec_electrical
''@3dpro.melbourne gave us the goods! 🔥Shipped us some same day cut out tools for our new build project 🤟🏼'' @electricalhowto