My Account
We will send you an email to reset your password.
Made by an Electrician
Custom Text Available
Save Time
3D Printed
Made to order
Has your Apprentice picked up your screw box again without closing the latches?
Fear no more, we've got you covered!
Designed to fit the Milwaukee Packout (48-22-8430 only) is our unique lid holder
Simply add this kit to your packout handle to save yourself from your lid opening and your screws falling all over the ground.
Kit includes:
2 x Lid holders
2 x Screw holders (left and right)
2 x 32mm 7gauge Screws
Instructions:
1. Line up Lid holders to the front corners of handle
2. Use marker to mark middle of screw hole on handle
3. Drill 4mm hole in handle
5. Grab screw holders and use (L) for left hand side of handle and (R) for right hand side of handle
4. Insert Screw holders through side of handle (push firmly until flush with handle)
5. Hand screw in lid holder to screw holder (do not use power tools) until tight/firm
6. Re-hire your apprentice after you fired him for the 5th time this week
7. Enjoy the lid holder
At 3DPRO we use PETG Filament for all of our 3D Printed Products.
PETG filament is the ideal choice for Trade accessories due to it's durability, water resistance and impact resistance.
PETG is UV resistant to some degree, however prolonged exposure to UV light can cause the product to degrade or warp overtime.
Please avoid leaving your 3D Printed product directly behind glass such as your windscreen or Packout clear lids as this can act as magnifying glass onto the product which can cause degradation and warping.
1. Are your products 3D Printed?
Yes, all of our Templates, Labels, Latches, Handles and Dividers are 3D Printed in-house using PETG filament.
2. Are you products Made to Order?
Yes, we make all 3D Printed products on demand which is why we can provide custom text and colour combinations.
3. How should I look after my 3D Printed Product?
Please refer to the MATERIAL tab about PETG properties.
Please avoid your 3D Printed Products from having prolonged exposure to direct sunlight and/or high temperatures as this can cause it to deform or warp, particularly if left behind a windscreen of clear Packout lid as this acts as a magnifying glass onto the product.
4. Can I customise my product?
Yes, we offer CUSTOM text on all of our templates, labels, latches and handles. As well are custom colours. If there is a colour you're wanting but cannot find it on our website, please email info@3dpromelbourne.com.au and we can see how we can help!
5. Can I get a different colour to match my Company branding?
Yes, please email info@3dpromelbourne.com.au if there is a colour you want which is not shown on our website. We will see how we can help match to your company's colours.
6. I have purchased a CUSTOM 3D printed product but want to return it, how can I do this?
Unfortunately, we do not accept returns on any of our CUSTOM products as these cannot be sold again due to the custom text. If your product is damaged and/or faulty please get in contact as we will replace damaged items as long as it is unused, you have the original packaging and has been kept following the care requirements of the PETG material. Photos and evidence of the above must be provided for damaged/faulty goods to be accepted.
SHIPPING:
We offer FREE Standard Shipping for the following thresholds
AUSTRALIA - Orders over $100AUD
UNITED STATES - Orders over $100USD
U.K - Orders over £100 GBP. (excluding Pack-A-Shelf Products)
No free shipping thresholds apply to PACK-A-SHELF products. All orders under the thresholds above will be calculated at checkout.
RETURNS:
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
There are certain situations where only partial refunds are granted (if applicable)
Items with obvious signs of use. Any item not in its original condition is damaged, or missing parts for reasons not due to our error and any item that is returned more than 30 days after delivery will be deemed as non-returnable items.
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
FAULTY OR DAMAGED ITEMS:
If your item is faulty or damaged when received, please get in contact as soon as your receive the items. Please retain all of the original packaging and do not use the product if faulty or damaged.
Please email info@3dpromelbourne.com.au if you have received damaged on faulty products and provide your order number, a description of the damage and photos of the faulty/damaged goods.
If care requirements for PETG products have not been followed the product will not be deemed faulty. Information on PETG material is listed under the MATERIAL tab.